Dial Temperature And Humidity Controller LY-WSK-P

Product Advantages

Advanced Sensor Technology

Equipped with internationally advanced sensors, the LY-WSK-P enables long-term, automatic monitoring and sampling of ambient temperature and relative humidity. This ensures continuous, reliable data collection to support timely environmental adjustments.

Rapid Abnormal Response

The controller delivers instant reaction to ambient temperature anomalies and condensation risks. When condensation is likely to form, it activates the heating unit immediately to eliminate the risk. Additionally, if ambient temperature deviates from the preset value (too low for warming type, too high for cooling type), it triggers corresponding heating or cooling loads until conditions return to normal, then resumes monitoring in an automatic cycle.

User-Centric Design

With a compact footprint of 48×48×78mm³, the LY-WSK-P is easy to install and operate right out of the box, requiring no complex assembly. Its durable construction ensures a long service life, reducing maintenance costs for users.

High Precision & Energy Efficiency

Powered by high-precision chips, the controller ensures accurate temperature and humidity control with stable, reliable performance. It boasts low power consumption (≤2W), making it an energy-saving choice for industrial applications.

Technical Specifications

The LY-WSK-P Dial Temperature And Humidity Controller runs on a power supply of AC 220±10% at 50Hz, with tailored operating environments for different types: the cooling type functions stably within 0℃~95℃, while the heating type adapts to a wider range of -40℃~55℃. It delivers precise temperature control with a range of ±1℃ and rapid response capability, with a representative response time of ≤5s. The controller supports a resistive load output of AC220V 3A in normally open mode, and boasts ultra-low power consumption of ≤2W, making it an energy-efficient choice for long-term operation. It also features excellent electrical safety performance, withstanding a voltage of 1500V at 50Hz for 1 minute without breakdown or arcing. In terms of mechanical durability, it can resist vibration of 20m/s² within the frequency range of 10~150Hz for 3 minutes while maintaining normal operation. Additionally, it has three-proof performance to prevent damage from acids, alkalis and salts, and its compact dimensions of 48×48×78mm³ allow for flexible installation in various limited-space industrial scenarios.

Applications

The LY-WSK-P dial temperature and humidity controller is specifically designed for environments where extreme temperatures or condensation could damage equipment. Its key applications include:

Electrical Equipment：High and low voltage complete sets of cabinets, switchgear, underground substations, instrumentation boxes, and power distribution units.

Industrial Settings：Any industrial area requiring precise temperature and humidity control to prevent condensation, mold growth, or equipment malfunction caused by environmental fluctuations.

Selection Guide

Choose the right model based on your temperature control needs with our clear selection chart:

Operation Guide

After powering on the controller, adjust the dial—counterclockwise for cooling type and clockwise for warming type. When the pointer’s indicated temperature is lower (for cooling) or higher (for warming) than the ambient temperature, the indicator light will turn on and the connected load will start operating.

Reverse the dial adjustment: if the pointer’s indicated temperature is higher (for cooling) or lower (for warming) than the ambient temperature, the indicator light will turn off and the load will stop working. This confirms correct wiring and normal operation. (Note: The product has a 4–6℃ control differential.)

For detailed operation steps and troubleshooting tips, refer to the official product operation manual.